GOODBO MOULD LIMITED

1.How to make a mould？

We focus on innovation and continuous improvement to maintain a competitive advantage.
1. Start by gathering the materials you need to make the mould. You will need a container to hold the mould, a material to make the mould from (such as silicone, plaster, or clay), and a release agent (such as petroleum jelly or cooking spray).
2. Prepare the container for the mould. Make sure it is clean and dry, and then apply a release agent to the inside of the container. This will help the mould come out of the container easily when it is finished.
3. Mix the material you are using to make the mould. Follow the instructions on the package for the best results.
4. Pour the mixture into the container and spread it evenly. Make sure to fill the container completely and leave no air pockets.
5. Allow the mould to dry completely. Depending on the material you are using, this could take anywhere from a few hours to a few days.
6. Once the mould is dry, carefully remove it from the container. If necessary, use a knife or other tool to help loosen the edges of the mould.
7. Your mould is now ready to use!

2.Is the back injection mold designed for easy customization to meet specific product requirements?

We have the leading technology and innovation capabilities, and attach importance to employee training and development, and provide promotion opportunities.Yes, many molds are designed to be easily customized to meet specific product requirements. Depending on the complexity of the product, the mold may need to be modified or completely redesigned to meet the desired specifications.

3.How important is the accuracy of a back injection mold?

We operate our back injection mold business with integrity and honesty.The accuracy of a mould is extremely important, as it directly affects the quality of the finished product. If the mould is not accurate, the product may not fit together properly, or may not have the desired shape or size. In addition, if the mould is not accurate, it can lead to defects in the finished product, such as warping, cracking, or other imperfections.

4.About the scale of back injection mold factory

Our company currently has over 200 employees and produces around 400-600 sets of various plastic injection molds annually.

5.How does the back injection mold contribute to achieving a desired surface finish on the molded products?

We adhere to the principle of integrity and transparency, and establish long -term relationships with partners, and we attach great importance to this detail.The mold contributes to achieving a desired surface finish on the molded products by providing a smooth, uniform surface that can be polished or textured to the desired finish. The mold also helps to ensure that the product is free of any defects or imperfections that could affect the surface finish. Additionally, the mold can be designed to create specific textures or patterns on the surface of the product.

6.How does the back injection mold contribute to cost-effectiveness in terms of production efficiency and material utilization?

Being one of the top back injection mold manufacturers in China, We attach great importance to this detail.Molds are used to create parts and components with a high degree of accuracy and repeatability. This helps to reduce waste and increase production efficiency. The use of molds also allows for the efficient use of materials, as the same mold can be used to create multiple parts with the same shape and size. This reduces the amount of material needed to produce a given number of parts, resulting in cost savings. Additionally, molds can be designed to reduce the amount of time needed to produce a part, further increasing production efficiency and cost-effectiveness.

7.How can a back injection mold be corrosion-resistant?

We have a wide range of back injection mold customer groups and establishes long -term cooperative relationships with partners. The countries we provide services include Nicaragua,Ethiopia,Kenya,Malaysia,Central African Republic,Benin,Philippines.Moulds can be made corrosion-resistant by using materials such as stainless steel, aluminum, and other alloys that are resistant to corrosion. Additionally, the moulds can be coated with a corrosion-resistant material such as a paint or a powder coating.

8.What is the production capacity of the factory for back injection mold?

The annual manufacturing capacity is around 400-600 sets of various plastic injection moulds for parts of auto parts, home appliances, medical instruments, office appliances and communicating equipments, etc.

9.About back injection mold delivery time

3-4 weeks for the 1st.artical. Lead time for plastic mold manufacturing depends on the complexity of the mold and the size of the order.

10.How does shrinkage of the material being moulded affect the finished product?

We have rich industry experience and professional knowledge, and have strong competitiveness in the market.Shrinkage of the material being moulded can affect the finished product in a variety of ways. If the material shrinks too much, it can cause warping, cracking, or other deformities in the finished product. It can also cause the product to be smaller than expected, or to have a different shape than intended. Additionally, shrinkage can cause the product to have a different surface finish than expected, or to have a different color than intended.

11.What is the difference between an injection mould and a compression back injection mold?

We have been working hard to improve service quality and meet customer needs.An injection mould is a tool used to produce plastic parts by injecting molten material into a mould cavity. The molten material is injected under pressure and cooled to form the desired shape. A compression mould is a tool used to produce plastic parts by pressing a preheated plastic material into a mould cavity. The material is then cooled and hardened to form the desired shape. The main difference between an injection mould and a compression mould is the way in which the molten material is introduced into the mould cavity.

12.What processes are involved with the conservation and maintenance of a back injection mold?

We should have a stable supply chain and logistics capabilities, and provide customers with high -quality, low -priced back injection mold products.
1. Cleaning: Moulds should be cleaned regularly to remove any dirt, dust, or debris that may have accumulated on the surface. This can be done with a soft cloth or brush and a mild detergent.
2. Inspection: Inspect the mould for any signs of damage or wear. If any damage is found, it should be repaired or replaced as soon as possible.
3. Lubrication: Moulds should be lubricated regularly to ensure that they are functioning properly and to prevent wear and tear.
4. Storage: Moulds should be stored in a cool, dry place away from direct sunlight and other sources of heat.
5. Maintenance: Regular maintenance should be performed on the mould to ensure that it is functioning properly and to prevent any further damage or wear. This may include replacing worn parts, sharpening cutting edges, and checking for any signs of corrosion.

13.What type of steel is normally used for a back injection mold?

We focus on our customers' needs and strive to meet their expectations, so we take this very seriously.
Tool steel is typically used for moulds. Common types of tool steel include high-speed steel, hot-work steel, cold-work steel, shock-resistant steel, and plastic mould steel.

14.How do back injection mold help to reduce production costs?

back injection mold is not a product only, but also can help you comes to money-making.Moulds can help to reduce production costs by reducing the amount of time and labour required to produce a product. Moulds can be used to create multiple identical parts quickly and efficiently, eliminating the need for manual labour and reducing the amount of time needed to produce a product. Additionally, moulds can be used to create complex shapes and designs that would be difficult or impossible to create by hand, reducing the need for expensive custom tooling.